Master Bedroom French Door

Finally finished the French Door that I built for the master bedroom. The rails, stiles and panels are all from select pine.

Finished Cabinet Drawers

Finally finished the drawers for my tool cabinet. The drawer fronts are cherry - no stain - just tung oil. The drawer runners are cherry as well. the drawer sides are poplar.

Sheet Goods Rack

Freshly stocked with plywood and african mahogany boards ready for projects. A 200 psi 17 gal compressor is in the background along with a wall mounted back.

Left Back Corner

The left corner has the planer - a Ridgid 4330, A Delta US made bandsaw - yes US made. Towards the back is rolling clamp rack (home made) and it contains a lot of clamps. To the right is a 1.5 hp dust collector. Against the wall are shelves for screws, router bits and power hand tools.

Assembly Table

A simple assembly table has three sections. Two sections are MDF. The middle section removes to allow through cuts on sheet goods and lumber. The third section a double stack of baltic birch with the edges outfitted with Kreg Klamp tracks for lining up face frames for pocket screw installation.

Workbench

This bench is very well worn but it has done it somewhat gracefully. The whole bench weighs about 300 pounds with plenty of storage. Construction is hard maple.

The Centerpiece of the Shop

The table saw has a home made splitter. Still waiting for the ones made by Shark Guard. The fence has attached to it a sacrificial wood fence attached via a couple of special clamps from Rockler. It can't really be seen well but the router table forms the right hand extension. The miter gage is an Incra V27. I also use an Incra sled but the V27 is the handier of the two.